NAV-TV announced the release of the GONIGHT night vision pan and tilt surveillance systems. The GONIGHT is a low-cost, high performance pan/tilt surveillance system utilizing the FLIR Pathfinder long-wave infrared night vision camera, according to the company. GONIGHT allows users to see four times farther than a traditional searchlight and can identify thermal images up to more than 1,500 feet away in total darkness.

The GONIGHT is enclosed in a saltwater- and UV-resistant structure capable of 370-degree rotation and 135-degree up-and-down tilt. Both dash-mount and handheld wireless transmitters are included with the GONIGHT enabling the operator to control the unit wirelessly from within 150 feet. Each transmitter can be programmed to single or multiple frequencies in order to control stand alone or multiple GONIGHT systems with a single remote.

Operating on standard 12-volt DC and utilizing the included magnetic or permanent mounts, installation of the GOLIGHT is flexible, fast and easy, NAV-TV stated. The included quick detachable cable allows easy installation and removal of the GONIGHT on single or multiple vehicle applications.
For each of the four GONIGHT models, retail pricing is $6,995 for the GONIGHT(F+), $6,795 for the GONIGHT(F), $6,295 for the GONIGHT(S+) and $6,095 for the GONIGHT(S). Additional detachable cables may also be purchased for both the S and F series at $199 and $249 respectively. For more information, visit NAV-TV’s site.

Clarion has provided us with a couple of tech tips and related diagrams. The first is for making a video switcher using two SPDT relays. The second is for how to make a video switcher using a DPDT relay.

Read more…

Konaki USA’s KO-3691D amplifier provides one-channel, Class D technology, 4000 maximum power, variable high-low pass crossover controls with frequency response ranging from 20Hz to 20 KHz and a total harmonic distortion of 0.02 percent, according to the company. It also offers PWM MOSFET power supply with controlled DC to DC switching power, remote bass boost control at 45Hz: 0-18dB with an S/N ratio of 95dB. Peak power ranges from 800W to 2400W and is stable at 2 ohms. Konaki’s KO-3691D features a suggested retail value of $389.99. Further specs include: 4 Ohm: 500 W x 1; 20 Ohm: 900 W x 1; Mono: 1250 W x 1; and dimensions of 448 mm x 252 mm x 68 mm. Visit distributor 7 Elephants’ website for more information.

mObridge Inc. has announced the availability of its Bluetooth products to fit the Range Rover Sport and Discovery 3/LR3 vehicles with the MOST network. The hands-free kit provides full seamless integration into the factory radio providing access to call lists, incoming caller ID, hang-up and answer faculties, according to the company. mObridge Bluetooth uses Parrot technology. This product is currently available.

NAV-TV Corp. has announced the release of its GM-R40 General Motors instrument cluster interface for K40 Calibre Radar Systems. Integrating into the stock GM-LAN network, the GM-R40 displays radar warnings and status directly on the stock instrument cluster, eliminating the need to modify the vehicle to install the K40 status and warning LEDs, according to the company. Additionally, the GM-R40 provides power to the Calibre Radar system only after the vehicle is started, thus ensuring proper voltage is supplied to the Calibre control unit and sensors. The GM-R40 is compatible with select 2007-and-up General Motors vehicles. MSRP is $349.

Scosche Industries introduces a new dash kit for the Nissan Altima. Shipping in June, the NN1660B installation kit will fit Nissan Altima cars manufactured in 2005 and 2006. For a seamless installation of an aftermarket head unit, the NN1660B is designed to accommodate an ISO Double DIN mount. The kit is painted to match the factory radio and is made of high strength ABS/PC material. Designed to match the factory contour, the NN1660B offers custom installers a perfect fit. This vehicle specific installation kit will retail at $19.95 and includes all the necessary hardware and installation instructions. For a complete aftermarket installation, Scosche also manufacturers the matching harness, NN03B and matching antenna adapter, NDAB. The new Nissan Altima kit and all Scosche products are available at specialty retailers across the nation.

Autotek has released the AT950, a new 950 Watt maximum A/B Class 4-channel amplifier. All five AT Series amplifiers are SEPP (single ended push-pull) A/B Class designs with 2- and 4-channel models that are bridgeable. The Super Sport ASPS MOSFET PWM power supply offers instant maximum current output for 1-Ohm capable A/B class mono block amp and 2-Ohm stereo or 4-Ohm bridge capable A/B class 2- and 4-channel amps. The 4-channel Super Sport amps can configure into 3-channel right and left and sub mode. All amps in the AT series feature MOSFET audio outputs lowering the amplifiers need for massive amounts of battery amperage with power ranges from 950 to 2,000 Watts maximum. In addition, the Super Sport amp protection system includes a diagnostic LED indicator to warn and detect against current, amperage overload, short circuits, thermal overload and DC offset. Other key features of the AT series are preamp level RCA inputs and daisy-chain line outputs that permit adding amplifiers to the car audio system without using costly and noise ridden Y-connectors, according to the company. This product is shipping now. Visit the Autotek website for more information.

Massive Audio offers its Nano Block series of power amplifiers for 2010. These four fully compliant, CEA-2006-rated amplifiers are designed to fit into restrictive or limited spaces. “Nano Block” models N2, N3 and N4 are Full Digital Class “D” mono amplifiers that make full CEA rated power at 1 ohm and have one of the smallest installation foot prints in today’s industry, the company stated. All four new “Nano Block” aluminum heat sinks are anodized in a “Raven Black” finish that’s only 5.5 inches wide and 2.1 inches tall. Precise calculations in efficient heat sink design plus “Micro Circuit Typology” makes the 1,600W N2 only 7.2 inches long. The 2,800W N3 is 10.3 inches, and the 4,000W N4 is 13.4 inches. Installers can combine all models by stacking or using inline mounting combinations or mount any of these combinations vertically, according to the company. The cornerstone of the “Nano Block” series of amplifiers is the new 1,600W four-channel Nx 4, the company stated. This Hi Fidelity full-range class “AB” amplifier has the same mounting footprint and color as its big brothers. This series also offers adjustable Hi/Lo 24dB X-Overs, 12dB bass boost control, 24dB sub harmonic filter, dual sided mill spec PCBs and ultra-efficient Nano Technology power supplies. Visit Massive Audio’s website for more information.

Scosche Industries has announced it will ship a new installation kit for the Nissan Titan. The custom designed NN1645B installation kit offers the Scosche “Custom Kit, Factory Fit” for all 2008 and up Nissan Titan vehicles. The NN1645B will accommodate an ISO Double DIN mount or an ISO Single DIN mount with pocket. The kit is painted to match the factory dash, is made of high strength ABS/PC material, matches the factory contour and includes snap-in clips. The signature Scosche design features no cutting or modification of the dash kit when installing a Double DIN aftermarket head-unit. The NN1645B also includes an auxiliary input harness, all of the necessary hardware and detailed installation instructions. The NN1645B will be available at specialty retailers across the nation and will retail for $49.95. For a complete aftermarket installation, Scosche also manufactures matching harness, NN04B and matching antenna adapter, NAA2B.

Xstatic LLC now offers its BatCap 4000 battery that has been in development for more than two years. This new battery offers twice the energy of the company’s BatCap 2000. Designed for industrial use, automotive use and especially car audio use, this battery is just shy of 80 lbs and retails for $499. The approximate dimensions are 6 3/4 inches wide x 8 5/8 inches high x 13 long. For more information contact Xstatic LLC at (334) 692-4650 or visit the company’s website.